Crude Pipeline Corrosion Inhibitor
During normal pipeline operation, warm crude oil with small amounts of salt and water comes in contact with the internal part of the pipeline. There arises a chance of salt and water accumulation in the pipeline areas where the flow is relatively low like future pump piping connections and bypass piping. If these deposits are not removed at proper time, corrosion can damage operating equipment and can cause potentially disruptive repairing. This product is designed to prevent such corrosion and enhances equipment longevity.
Functions of Silver in ALSTASAN SILVOX
Silver shows oligo-dynamic effect or toxicity on bacterial cells even in relatively low concentrations. Silver ions denature enzymes of the target cell or organism by binding to reactive groups, resulting in their precipitation and inactivation. Silver inactivates enzymes by reacting with the thiol groups to form silver sulphides.
Hydrogen Peroxide is not stable which means that it decomposes to oxygen and water. To solve this problem silver is added to hydrogen peroxide as stabilizer. This stabilizer prevents the slow decomposition of the hydrogen peroxide. The Ag2+ ions keep O2- ions.
The silver performs as an activator. The singularity of this silver activator is that it only activates the peroxide when it is exposed to biofoulants. In contact with microbes the silver loses its stabilizing function and activates to release nascent oxygen to oxidize the exposed microbes. When all bacteria have been oxidized by the generated active oxygen compounds, the silver acts as stabilizer for the remaining and non-reacted oxygen.
Key Features and Benefits
- Extends equipment life
- Minimize the risk of in-service failure
- Easy and quick in handling
|pH (Neat)||1.5 – 1.2|
|Specific Gravity||1.15 – 1.20|
|Solubility||Completely soluble with water|
|Assay as Hydrogen Peroxide IP Grade||50.0% min.|
|Assay as Nano Silver||500ppm ± 50.0|
|Composition||40% formaldehyde solution||Hydrogen peroxide with silver nanoparticles|
|Attributes||Bactericide, fungicide, virucide||Bactericide, fungicide, virucide,
|Inactive on||Amoebae, protozoa, biofilms||None|
|Toxicity||800 – 1700mg/kg body weight
WHO Class II (Moderately hazardous)
|5000mg/kg body weight
WHO Class III (Slightly hazardous)
|Flushing with water||Yes.
Around 100L/ sq.m for draining traces
|Minimal to none|
|Time between fumigation and plantation||3 weeks minimum with plastic cover||4 – 6 hours|
ALSTASAN SILVOX is used in various applications for disinfection of air, water, soil and surface. Please refer your CSL representative to ask for application specific MOU (Method of Use) card.
Proper human safety products such as splash goggles, lab coat, vapour respirator, NIOSH approved gloves and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush them with fresh water and obtain medical attention. Should not be injected.
ALSTASAN SILVOX is an oxidizing product and should be stored in original vented containers, away from heat, direct sunlight and combustibles. Store in a cool and dry place. Please refer label and SDS for details.