Corrosion is referred to as the deterioration of materials by chemical interaction with the corrosive agents. A common phenomenon observed in oilfield installations, Corrosion complicates the overall working and operations depending upon the type of the metal and reagents used. The problem of corrosion increases when hydrogen ion concentration seems to be very high to react with the electrons of the metals, damaging operational equipment and structures. Acidic Corrosion refers to an electrochemical process that occurs due to the reaction of atmospheric moisture and environmental pollutants with the metal. Acidic Corrosion causes wear and tear of material mainly by acidic components which can be prevented on application of right proportionated inhibitor.
Corrosion Inhibitors does not allow the accumulation of reducing agents to the surface of the metal and forms a thin protective film that covers the surface and molecules of the chemical gets adsorbed on the same, making the surface inert and prevent almost all kind of reactions with corrosive agents.
Acid Corrosion Inhibitor prevents attack of acidic components present in the environment, on the metal components without interfering with the actual process. The type and concentration of the Acid Corrosion Inhibitor to be used depends upon the characteristics of metal that is needed to be protected and the operating conditions under which the metal works. Iron, aluminum, copper, etc., all require specific acid inhibitor formulations of corrosion preventative coatings for desired result.
Key Features and Benefits
- Designed with all organic chemicals
- Complete single treatment for prevention of non-biological fouling
- Excellent corrosion inhibition for all metals
- Can retain higher levels of hardness in the water & holds blow down to a minimum
- Excellent control of calcium phosphate sludge and iron fouling
- Eliminates or reduces acid dosing for pH control
- Effective over a wide pH and temperature range
Proper human safety products such as splash goggles, lab coat, vapour respirator, NIOSH approved gloves and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush them with fresh water and obtain medical attention. Should not be injected.
Should be stored in original vented containers, away from heat, direct sunlight and combustibles. Store in a cool and dry place. Kindly refer label and SDS for details.