Anionic Trash Neutralizer
Anionic Trash is referred to as negatively charged colloidal and dissolved polymeric materials in paper furnish, usually coming from the wood. With the increasing use of secondary fibers and with whitewater recirculating systems being in tighter chambers, high amounts of dissolved and colloidal substances (DCSs) are often accumulated in papermaking systems. DCSs, which in most cases are highly negative and are thus also called anionic trash, severely affect the effectiveness of many cationic chemical additives, including cationic dry strength agents (DSAs).
It is generally reasonable to recommend using Anionic Trash Neutralizer/ Anionic Trash Catcher (ATC) before using a cationic dry strength agent such as cationic starch or cationic polyacrylamide. Ideally, the ATC at its proper dosage neutralizes all the anionic trash while the negativity of the fiber is not affected, so that the fiber can take as much of the subsequently added cationic chemicals to ensure their effectiveness.
Proper human safety products such as splash goggles, lab coat, vapour respirator, NIOSH approved gloves and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush them with fresh water and obtain medical attention. Should not be injected.
Should be stored in original containers away from heat, direct sunlight. Store in a cool dry place. Please refer label and SDS for details.