Anionic polyelectrolyte based proprietary additive for removal of excess or “bad” water that surfaces up during drilling fluid or borehole application. Excessive water during production affects oil well efficiency and reduces their operational life. The presence of water in the bore not only increases the fluid column’s load but also increases lifting requirements. This water shut off polymer ensures complete elimination of undesired water production during water shut off operations. The product is non corrosive and is absolutely safe on all types of materials and alloys.
Key Features and Benefits
- Works well at even low use concentration
- Faster Settling and Improved filterable flocs
- Inhibits water based scales and oxidation induced corrosion in metal pipelines
- Maximum water content up to 12% by weight even at 105 degree celsius.
Proper human safety products such as splash goggles, lab coat, vapor respirator, NIOSH approved gloves and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush them with fresh water and obtain medical attention. Should not be injected.
Should be stored in original vented containers, away from heat, direct sunlight and combustibles. Store in cool, dry well ventilated area in tightly closed, plainly labeled containers. Keep away from incompatible materials.