Overview

Utility chemicals are special formulations with a higher added value that can be added to a number of products in relatively less amount to enhance the performance of those products. Some categories of utility chemicals are adhesives, agro chemicals, cleaning materials, colors, construction chemicals, paints, polymers and surfactants. Other industrial sectors such as automotive, aerospace, food, cosmetics, agriculture, manufacturing, and textiles are highly dependent on such products. Utility chemicals are used on the basis of their application and properties.

Desalination & RO Plants

Thermal Desalination Antiscalant

Thermal Desalination Antiscalants are precisely formulated chemicals that can successfully remove dissolved contaminants from water over a wide range of temperatures as well as other operating conditions. These chemicals have excellent control on formation of scales as well as provide effective control over fouling. Regular usage of this formulation reduces the requirement of point to point cleaning. Antiscalants are very productive when it comes to alkaline scale formation as most of the scales that gets accumulated in the desalination plants are of alkaline calcium and magnesium compounds. This formulation effectively removes these dissolved alkaline compounds and also inhibit further precipitation of these dissolved salts in the desalinating plant.

Get Quote

RO/NF/UF Membrane Antiscalant

Antiscalants are effective in dwindling scale formation in presence of foulants like Sulfate salts of Calcium, Calcium Carbonate, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica. RO antiscalant keeps reverse osmosis system capacity close to design, and minimizes shutdowns and membrane cleaning cost. These chemicals are responsible for minimizing the risk of scaling and eliminates disastrous effect on the use of hazardous acids, resulting in efficient plant operation with highest possible conversion rate.

Key Features and Benefits

  • Inhibit scale formation and effectively controls corrosion
  • Protects the membrane efficiently
  • Enhance the plant operation and equipment life span
  • Economical

Get Quote

Cleaning Chemical

Cleaning agents are substances (usually liquids, powders, sprays, or granules) used to remove dirt, including dust, stains, bad smells, and clutter on surfaces. Purposes of cleaning agents include health, beauty, removing offensive odor, and avoiding the spread of dirt and contaminants to oneself and others. Some cleaning agents can clean and disinfect at the same time.

Get Quote

Wastewater Treatment

Polyelectrolyte

Polyelectrolytes are polymers with dissociating groups in their repeat units. They can be divided into poly-cations and poly-anions and poly-salts. Like ordinary electrolytes (acids, bases and salts), they dissociate in aqueous solutions (water) and bear one or more charges depending on the pH value.

Get Quote

Poly Aluminium Chloride

Poly Aluminum Chloride is an industry standard primary coagulant used for the treatment of drinking water, sewage and industrial effluents and is also a well-established paper processing aid. Poly aluminum chloride (PAC) is an aluminum based coagulant. It is a highly charged polymerization of aluminum ions and colloidal particles in water with high efficiency and power in bridging flocculation function. Effective water purifier used in the purification of table water, industry water, industry circulation water and wasted and polluted water from pharmacy industry, paper making industry and printing and dying industry, as well as life wasted water.

Get Quote

Deoiler

Deoliers are the polymers of fatty amines and acid with high molecular weight and charge on their surface to treat the residual oil from the produce water and ETP’s of petrochemical and oilfield installations. These products are usually liquid based, ready to use and cationic in nature. Especially useful for the treatment and separation of residual oil from the PW, effluent from crude processing and oil refineries.

 Get Quote

PolyDADMAC

PolyDADMAC is scientifically formulated for use in wastewater treatment and sludge dewatering developed to replace totally or partially the use of inorganic coagulants. It also helps to reduce the required doses of basic reagents used in the coagulation process including sodium hydroxide, lime etc. It is also effective in precipitating anionic surfactants.

Get Quote

Polyamine

Polyamine that is a group of neutralizing amines blended in a ratio that best suits the conditions of a low-pressure and a medium pressure boiler with long to short run condensate line and at various pressure range and liquid vapor distribution ratio. Polyamine is more recommended than any in-situ blend of amines. It is designed to prevent amine carbonate deposition

Get Quote

Process Cooling/ Heating

Cooling Tower Chemical

These chemicals are used in cooling tower applications in order to get rid of incompatible materials like corrosive agents, scaling agents, hard deposits, micro-organisms and others. These unwanted items disrupt the smooth working of cooling tower system so it becomes necessary to use cooling tower chemicals.

Get Quote

Chilled Water Corrosion Inhibitor

The Chiller Water Corrosion Inhibitor is used for inhibiting the corrosion from the interior parts of the closed loop system containing chiller water. It forms protective film on the internals made up of ferrous metals to prevent corrosion.

Get Quote

Glycol & Corrosion Inhibitor

The Glycol Chiller Corrosion Inhibitor is suitably utilized for inhibiting the corrosion effect on the internal parts of the glycol chiller systems. This inhibitor range is composed precisely and cautiously to make metal surface less susceptible to rust.

Get Quote

Descalant

Descalant Chemical is a blend of acidic compounds used to remove primarily lime scales from metal surfaces. Acidic compounds like acetic acid, citric acid, formic acid, phosphoric acid and hydrochloric acid are some of the descaling agent which are used with various alkaline carbonate salts of scales and in turn remove them.

Get Quote

Boiler Treatment Chemical

Boiler Water Treatment is required for removal of substances of toxic nature to the system. Boiler Water Treatment is needed to avoid scaling and corrosion, foaming and precipitation in a boiler system, feed water line and condensate lines.

Get Quote